Dacor ER36D-C Guía para resolver problemas descargar pdf (Pagina 43)

Page 9-29

SECTION 9 - COMPONENT REPAIR

Light Fixtures and Meat Probe

(continued)

Reinstalling the Rack Support:

Insert one end of the rack support into the

oven at a 20° angle to the sidewall.

Rotate the rack support into place, matching

the four (4) protruding pins on the rack

support to the holes in the oven wall.

Mount the rack support in place using the four

(4) existing screws.

Reinstall the racks and the oven door as

described in section 8.

Test the oven to ensure that repairs were

properly completed.

•

•

•

•

•

Door Latch and High Limit Switch

Turn off the gas supply at the supply valve

and power to the range at the junction or fuse

box.

Remove the oven door as described on page

8-1.

Remove the oven racks from the oven

chamber.

Remove all the mounting screws from the

intake grill K . The screws attach the grill to

the underside of the cooktop front panel I

and the top of the oven chambers(s) J .

R

emove the intake grill.

Label and disconnect the wires from the door

latch or high limit switch as necessary.

•

•

•

•

•

•

Use a ratchet to remove the sheet metal

screws that hold the door latch A or high

limit switch B in place. The door latch is held

in place by four (4) screws. The

high limit

switch is held in place by two (2) screws.

Reconnect the wires to the door latch or high

limit switch after mounting the replacement.

Reinstall the racks and the oven door as

described in section 8.

Test the oven to ensure that repairs were

properly completed.

•

•

•

•

I

J

K

B

A

1 2 ... 38 39 40 41 42 43 44 45 46 47 48

Comentarios a estos manuales

Sin comentarios