Dacor CM24P-1 Guía para resolver problemas descargar pdf (Pagina 17)

Test 16: Convection Fan right/large oven side

Press the right/large oven side PURE CONV. Key and verify that the CONV. And ON icons are lit. Verify that the Convection

Fan turns on.

Test 17: Bake Element left/small oven side (for 48” range otherwise skip step)

Press the left/small oven side BAKE key and verify that the BAKE and ON icons are lit. Verify that the Bake Element begins

to heat (glow red) and that between 10 and 14 amps are being drawn.

Test 18: Broil Element left/small oven side (for 48” range otherwise skip step)

Press the left/small oven side BROIL key and verify that the BROIL and ON icons are lit. Verify that the Bake Element

begins to heat (glow red) and that between 10 and 15 amps are being drawn.

Test 19: Convection Element left/small oven side (for 48” range otherwise skip step)

Press the left/small oven side CONV. BAKE key and verify that the CONV. BAKE and ON icons are lit. Verify that the

Convection Element begins to heat (glow red) and that between 8 and 12 amps are being drawn. Verify that the Convection

Fan turns on.

Test 20: Convection Fan left/small oven side (for 48” range otherwise skip step)

Press the left/small oven side PURE CONV. Key and verify that the CONV. and ON icons are lit. Verify that the Convection

Fan turns on.

Test 21: Error Codes

Press the TIMER 1 key. Verify that the error codes show in the temperature digits. If no fault codes are present display will

show “---“.

Test 22: Clear Error Codes

Press and hold the TIMER 2 key for at least 6 seconds. Verify that the temperature digits show “---“.

To EXIT ERC Diagnostic Test:

Press right/large oven CANCEL key. Verify that the display returns to the time of day mode. Verify that the time shown has

progressed.

Other ERC Tests:

Lock Out Feature:

Press the CANCEL/SECURE key and hold for 5 seconds. Verify that the LOCKED icon is lit. Press other keys and verify that

no actions occur. Press the CANCEL/SECURE key and hold for 5 seconds. Verify that the LOCKED icon is not lit. Press BAKE

key. Verify that the bake mode display is shown. Press CANCEL/SECURE. Verify that the screen shows the time of day.

Meat Probe:

Inset Meat Probe into oven socket. Press BAKE key then START key. Press PROBE key the START key. Verify that the Meat

Probe is accepted and showing PRB icon and temperature value of 90 or greater in the temperature digits. Press CANCEL

and remove Meat Probe to exit.

12/24-Hour Mode:

Press and hold the CLOCK key for 10 seconds. Verify that the clock digits show “12HR” or “24HR”. Toggle setting by

pressing SELF CLEAN key until the display show desired setting. Factory setting is “12HR”. Press CANCEL key to exit.

12-Hour Cook Mode: (This option is used to limit the maximum cooking time. If it is ON the cooking is limited to 12

hours)

Press and hold the TIMER 1 key for 10 seconds. Verify that the clock digits show 12HR and the temperature digits show

“ON” or “OFF”. Press the SELF CLEAN key to toggle between ON and OFF. Factory setting is “ON”. Press CANCEL key to

exit.

UPO Settings: (User programmable offset. Temperature offset to increase / decrease the calibration. The setting will affect all

modes)

Press and hold BAKE key 10 seconds. Using the numeric keypad: select your desired temperature adjustment. The

controller is adjustable in single degree increments and has a maximum slew of 35˚F. Factory setting is “0”. Press the SELF-

CLEAN key to toggle between + and -. Press CANCEL key to exit.

Celsius / Fahrenheit Setting:

Press and hold the BROIL key for 10 seconds. Verify that the “C” or “F” shoes in the temperature digits. Toggle between

“C” and “F” using the SELFCLEAN key. Factory setting is “F”. Press CANCEL key to exit.

Silent Mode Setting:

Press and hold the START TIME key for 10 seconds. Verify that the click digits show “BEEP”. Verify that the temperature

digits either “ON or “OFF”. Toggle between “ON” and “OFF” using the SELFCLEAN key. Press CANCEL key to exit.

Timers:

Press TIMER 1, then number 1 then START key. Verify that the timer changes from 1:00 to 0:59 and continues to count

down. Press TIMER key again. Verify that the clock shown 0:00 to cancel timer. Repeat for TIMER 2.

PG: 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 32 33

Comentarios a estos manuales

Sin comentarios

Dacor CM24P-1 Guía para resolver problemas Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Cafeteras Dacor CM24P-1